Search
- Ford Reliability Tour at Ford Airport, Dearborn, Michigan, 1930 - From 1925-1931, Ford Motor Company sponsored annual air tours to promote reliability and safety in commercial aircraft. Pilots flew to pre-determined cities, and their airplanes were rated on the ability to take off and land quickly and maintain consistent speeds. The 1930 tour included 18 entries and visited 29 cities in the United States and Canada.
- September 27, 1930
- Collections - Artifact
Ford Reliability Tour at Ford Airport, Dearborn, Michigan, 1930
From 1925-1931, Ford Motor Company sponsored annual air tours to promote reliability and safety in commercial aircraft. Pilots flew to pre-determined cities, and their airplanes were rated on the ability to take off and land quickly and maintain consistent speeds. The 1930 tour included 18 entries and visited 29 cities in the United States and Canada.
- Construction of Ford Tri-Motor 14-AT Showing Center Hispano Suiza Engine, January 1932 - Ford Motor Company's Tri-Motor, built from 1926-1933, flew in many early American airline fleets. The all-metal airplane was rugged, dependable, and equally adaptable to passenger and freight service. Tri-Motors were built with some of the same mass production techniques used in Ford's automobile plants. This version, the 14-AT, featured three Hispano-Suiza Engines. This photograph reveals the interior of the central engine.
- January 05, 1932
- Collections - Artifact
Construction of Ford Tri-Motor 14-AT Showing Center Hispano Suiza Engine, January 1932
Ford Motor Company's Tri-Motor, built from 1926-1933, flew in many early American airline fleets. The all-metal airplane was rugged, dependable, and equally adaptable to passenger and freight service. Tri-Motors were built with some of the same mass production techniques used in Ford's automobile plants. This version, the 14-AT, featured three Hispano-Suiza Engines. This photograph reveals the interior of the central engine.
- Ford Tri-Motor Airplane Fuselage Being Constructed at the Stout Factory, Dearborn, Michigan, April 1929 - Ford Motor Company's Tri-Motor, built from 1926-1933, flew in many early American airline fleets. The all-metal airplane was rugged, dependable, and equally adaptable to passenger and freight service. Tri-Motors were built with some of the same mass production techniques used in Ford's automobile plants. The fuselage, or the main body of the airplane, is constructed in this photograph.
- April 30, 1929
- Collections - Artifact
Ford Tri-Motor Airplane Fuselage Being Constructed at the Stout Factory, Dearborn, Michigan, April 1929
Ford Motor Company's Tri-Motor, built from 1926-1933, flew in many early American airline fleets. The all-metal airplane was rugged, dependable, and equally adaptable to passenger and freight service. Tri-Motors were built with some of the same mass production techniques used in Ford's automobile plants. The fuselage, or the main body of the airplane, is constructed in this photograph.
- Ford Tri-Motor 5-AT-112 Airplane at Ford Airport, 1932 - In 1928, the Stout Metal Airplane Company, a division of Ford Motor Company, introduced a new airliner. The 5-AT was faster and more powerful than its popular predecessor, the 4-AT. It had a longer wingspan and higher passenger capacity, and became the most successful all-metal, multi-engine passenger plane in the country. Virtually all existing airlines flew Ford 5-ATs.
- June 24, 1932
- Collections - Artifact
Ford Tri-Motor 5-AT-112 Airplane at Ford Airport, 1932
In 1928, the Stout Metal Airplane Company, a division of Ford Motor Company, introduced a new airliner. The 5-AT was faster and more powerful than its popular predecessor, the 4-AT. It had a longer wingspan and higher passenger capacity, and became the most successful all-metal, multi-engine passenger plane in the country. Virtually all existing airlines flew Ford 5-ATs.
- Drawing, "Chair - Cabin," Ford Tri-Motor (5-AT), December 9, 1930 - The Ford Motor Company created over a million parts drawings from 1903 to 1957. Many of these drawings specify engineering requirements for the components of Ford-made vehicles--including automobiles, trucks, tractors, military vehicles and Tri-motor airplanes. Others document assembly components, stages of casting and forging, or experimental designs. Beginning in the 1940s, Ford transferred the drawings to microfilm.
- December 09, 1930
- Collections - Artifact
Drawing, "Chair - Cabin," Ford Tri-Motor (5-AT), December 9, 1930
The Ford Motor Company created over a million parts drawings from 1903 to 1957. Many of these drawings specify engineering requirements for the components of Ford-made vehicles--including automobiles, trucks, tractors, military vehicles and Tri-motor airplanes. Others document assembly components, stages of casting and forging, or experimental designs. Beginning in the 1940s, Ford transferred the drawings to microfilm.
- Ford Trimotor 4-AT-10 and Bleriot Airplane at Ford Airport, Dearborn, Michigan, April 1928 - Two generations of aircraft contrasted at Ford Airport. The smaller Bleriot XI was of the type flown by French pilot Louis Bleriot across the English Channel in 1909. Its wood frame and fabric-covered surfaces were light but fragile. The larger Ford Trimotor was of a design built from 1926 to 1933. Its metal construction and three motors suggested strength and safety.
- April 11, 1928
- Collections - Artifact
Ford Trimotor 4-AT-10 and Bleriot Airplane at Ford Airport, Dearborn, Michigan, April 1928
Two generations of aircraft contrasted at Ford Airport. The smaller Bleriot XI was of the type flown by French pilot Louis Bleriot across the English Channel in 1909. Its wood frame and fabric-covered surfaces were light but fragile. The larger Ford Trimotor was of a design built from 1926 to 1933. Its metal construction and three motors suggested strength and safety.
- 1939 Douglas DC-3 behind Henry Ford Museum, August 26, 1999 - When North Central Airlines donated Douglas DC-3 number N21728 to The Henry Ford in 1975, it had logged nearly 85,000 flight hours -- a record for a commercial aircraft at the time. After flying into Dearborn under its own power, the plane was moved by crane to a display location behind Henry Ford Museum. It was moved inside the museum in 2003.
- August 26, 1999
- Collections - Artifact
1939 Douglas DC-3 behind Henry Ford Museum, August 26, 1999
When North Central Airlines donated Douglas DC-3 number N21728 to The Henry Ford in 1975, it had logged nearly 85,000 flight hours -- a record for a commercial aircraft at the time. After flying into Dearborn under its own power, the plane was moved by crane to a display location behind Henry Ford Museum. It was moved inside the museum in 2003.
- Ford Tri-Motor Airplane, Interior Cabin Showing Steward Serving Passengers, September 1929 - Passenger air travel was a completely new -- and perhaps fearsome -- concept for most Americans in the 1920s. National advertisements for the Ford Tri-Motor promoted "roomy and comfortable" wicker passenger chairs -- one of the many advertised amenities used to convince a skeptical public of the appeal of flying in a Ford plane. Later models of the Ford Tri-Motor featured almuminum seats covered with leather.
- September 01, 1930
- Collections - Artifact
Ford Tri-Motor Airplane, Interior Cabin Showing Steward Serving Passengers, September 1929
Passenger air travel was a completely new -- and perhaps fearsome -- concept for most Americans in the 1920s. National advertisements for the Ford Tri-Motor promoted "roomy and comfortable" wicker passenger chairs -- one of the many advertised amenities used to convince a skeptical public of the appeal of flying in a Ford plane. Later models of the Ford Tri-Motor featured almuminum seats covered with leather.
- Ford Tri-Motor Airplane Being Constructed at the Stout Factory, Dearborn, Michigan, February 1929 - Ford Motor Company's Tri-Motor, built from 1926-1933, flew in many early American airline fleets. The all-metal airplane was rugged, dependable, and equally adaptable to passenger and freight service. Tri-Motors were built with some of the same mass production techniques used in Ford's automobile plants. In this photo, the propellers are being connected to the fuselage or the main body of the airplane.
- February 19, 1929
- Collections - Artifact
Ford Tri-Motor Airplane Being Constructed at the Stout Factory, Dearborn, Michigan, February 1929
Ford Motor Company's Tri-Motor, built from 1926-1933, flew in many early American airline fleets. The all-metal airplane was rugged, dependable, and equally adaptable to passenger and freight service. Tri-Motors were built with some of the same mass production techniques used in Ford's automobile plants. In this photo, the propellers are being connected to the fuselage or the main body of the airplane.
- 1939 Douglas DC-3 Being Moved to Its Place behind Henry Ford Museum, June 2, 1975 - North Central Airlines donated a Douglas DC-3 airplane to The Henry Ford in 1975. After the plane flew to Ford Motor Company's proving ground -- first developed as an airport in 1924 -- its wings were removed and the aircraft was transported by crane to Henry Ford Museum. It was reassembled and displayed outside the museum until moved indoors in 2003.
- June 02, 1975
- Collections - Artifact
1939 Douglas DC-3 Being Moved to Its Place behind Henry Ford Museum, June 2, 1975
North Central Airlines donated a Douglas DC-3 airplane to The Henry Ford in 1975. After the plane flew to Ford Motor Company's proving ground -- first developed as an airport in 1924 -- its wings were removed and the aircraft was transported by crane to Henry Ford Museum. It was reassembled and displayed outside the museum until moved indoors in 2003.